Our readers keep the lights on and the coffee maker working hard! As an Amazon Associate, I earn from qualifying purchases.
Specs are compiled from manufacturer listings and verified buyer reviews and can change over time — please confirm the key details on the product page before buying.
Setting up a garage gym means one big decision: which single piece of equipment gives you the most muscle for the square footage. The wrong pick leaves you with wobbly safety bars, a pulley that sticks, or a rack that’s too shallow for bench press. This guide cuts through the specs to show you the steel cages and cable stations that earn their concrete floor space—the ones owners actually trust for heavy lifts day after day.
I’m Mohammad — the founder and writer behind Calories Fit. This guide is built by comparing the manufacturers’ published specifications and the patterns across verified customer reviews, so you get each pick’s real strengths and trade-offs instead of marketing spin.
From a 2,240-pound monster with integrated weight stacks to a wall-mountable pulley station that tucks into a corner, every machine here solves a specific garage-gym problem. Use the table and deep reviews below to match the frame, pulley ratio, and safety features to your ceiling height, lifting goals, and budget for your workout equipment for garage.
Our Picks at a Glance
How To Choose The Best Workout Equipment for Garage
Picking garage gym gear is different from choosing equipment for a commercial space. You have to weigh ceiling height, concrete floor condition, and whether you can bolt into a wall stud. The three specs below separate racks that feel locked-in from ones that wobble on day one.
Steel gauge and upright size
The thickest commercial racks use 2-inch by 3-inch (or 2×2) steel with a wall thickness of at least 11-gauge (about 0.12 inches). Most home-gym power cages use 14-gauge steel (0.08 inches), which is still strong for 300-500 lbs but will flex under elite-level squats. The heavier the steel, the less the frame twists during explosive lifts like pull-ups or jerks.
Pulley ratio: 1:1 vs 2:1
A 1:1 ratio means the weight you load is exactly the weight you lift — 50 lbs on the peg feels like 50 lbs in your hands. A 2:1 ratio halves the resistance you feel, so a 100-lb stack gives 50 lbs of tension, but the cable moves twice as fast. 2:1 is smoother for high-rep cable flys and lat pulldowns, while 1:1 is more direct for heavy rows and pull-downs where you want to feel every pound.
Footprint and ceiling height
Most full-size power cages run around 82 to 88 inches tall. You need at least 6 inches of clearance above your head for pull-ups and a 7.5-foot ceiling minimum for most upright racks. Measure the depth too — a cage that needs 50 inches of floor space plus a 5-foot barbell behind it may not fit a standard one-car garage (roughly 9 ft by 18 ft of clear space after parking).
Quick Comparison
| Model | Best For | Weight Capacity | Pulley Ratio | Frame Material | Amazon |
|---|---|---|---|---|---|
| DONOW Smith Machine★ Best Overall | All-in-one with integrated stacks | 2,240 lbs | 2:1 | Alloy Steel (2×2) | Amazon |
| Mikolo Wall Mount CableSpace-Saver Pick | Compact pulley station | 400 lbs | 1:1 | Metal (14-gauge) | Amazon |
| JELENS S11 Power CageBudget Champion | Budget rack with pulldown | 2,000 lbs | 1:1 | Alloy Steel (50x50mm) | Amazon |
| SPORTSROYALS Power Rack | Versatile cage for intermediate lifters | 1,200 lbs | 1:1 | Alloy Steel (50x50mm/1.5mm) | Amazon |
| SPORTSROYALS Home Gym Station | Weight-stack machine with leg press | 265 lbs (user) | 2:1 | Alloy Steel (70x50mm) | Amazon |
| MAJOR FITNESS Drone1 Cage | Compact cage for cable crossovers | 1,500 lbs | 1:1 | Alloy Steel (2×2) | Amazon |
| Eonfit E2 Power Rack | 360-degree rotating arms | 1,200 lbs | 1:1 | Alloy Steel (2×2, 14-gauge) | Amazon |
| Mikolo HR06 Power Cage | Independent dual pulleys (aluminum) | 2,000 lbs | 1:1 | Alloy Steel (2×2, 2mm) | Amazon |
| MAJOR FITNESS F22 | Stable dual-triangle base | 1,600 lbs | 2:1 | Alloy Steel (2×3, 14-gauge) | Amazon |
| pooboo P43 Power Cage | High-capacity cage with 20+ attachments | 2,000 lbs | 1:1 | Alloy Steel, Plastic | Amazon |
| SunHome Multi-Function Gym | Dual-user Smith machine | 138 lbs (stack) | 1:1 | Alloy Steel (2×2) | Amazon |
In‑Depth Reviews
1. DONOW Smith Machine with Weight Stacks
Our pick — over 4.5★ from 200+ verified ratings; the strongest balance of quality and price.
A full commercial gym in one footprint — smith, cables, pull-up bar, and safety arms.
If you want one rig that does everything from squats to cable flys without swapping plates off a peg, this is it. The DONOW packs a Smith machine, power rack with safety arms, dual cable crossover system, and a multi-grip pull-up station into a single 78.58-inch-wide unit. The two selectorized weight stacks are enclosed in steel covers — no loose plates rolling around, and the 2:1 cable ratio gives you smooth, controlled resistance that mimics a commercial cable column.
The crowd favorite — with a 4.6-star average across hundreds of ratings — the build quality wins almost everyone over. Owners call the Smith bar glide “flawless” and say the cables run without any catch. At 2,240 lbs maximum weight recommendation, it dwarfs most racks in this roundup (compare to 400 lbs on the Mikolo wall-mount). The trade-off is the assembly: buyers report it took roughly 8 hours with two people and the written instructions can be frustrating. Plan a full weekend day and a youtube video, not the printed manual.
What wins people over is the versatility — lat pulldowns, rows, hip thrusts with the included ankle strap, and even dual-person cable work. The weight stacks are marked in kilograms, so you will do a quick mental conversion or add a conversion sticker. For the price, you are getting a machine that cost to less than comparable commercial units, according to owner experience.
The Steel That Stays Planted
- 2,240-lb max capacity — the highest in this guide by far
- Enclosed dual weight stacks for a clean, safe setup
- Smooth linear bearings on the Smith bar
The Assembly Reality
- Build alone took around 8 hours for most owners
- Weight stacks in kilograms only (no lbs marking)
- Needs at least 9 feet of ceiling clearance
Best for: The lifter who wants a single machine that handles squats, cables, pull-ups, and hip thrusts without buying separate rack, stack, and Smith unit.
Think twice if: You have a tight budget under or only have 7-foot ceilings — this machine needs serious vertical space.
2. Mikolo Wall Mount Cable Station
A cable crossover that bolts to the wall and leaves your floor open.
Garage floors are precious — this Mikolo station takes up just 26.9 inches deep by 25.6 inches wide on the wall. It is a pure cable machine with a dual adjustable pulley system offering 19 height positions for unilateral or bilateral training. The 1:1 cable ratio means every pound you load on the peg is exactly what you feel in your hands, which is ideal for precise isolation work like tricep pushdowns, face pulls, and single-arm rows.
The build is serious for the footprint: a commercial-grade 14-gauge powder-coated steel frame with nylon-coated aircraft cables rated for a 2200-pound tensile strength. Its maximum load capacity is 400 pounds. Owners consistently say it is a “great addition” when used 2-3 times per week, and they praise the smooth operation once the slides are lubricated with silicone. The catch is that this station must be anchored into a wall stud. That means no bolting to drywall, and one owner mentioned needing a wood block to offset their wall design. Stability reviews are mixed — it feels rock-solid only if you bolt it right.
The machine ships with a lat bar, cable bar, and tricep rope. The 10-degree upward weight pegs help keep plates from slipping. Owners mention the accessories are “a little sub-par” — beginner quality rather than pro-grade. If you already own a bench and a barbell and just need a cable station to fill out your garage, this is the most space-conscious route.
Wall-anchored versatility: Perfect for corner installation; comes with detachable sleeves for 1-inch and 2-inch plates.
Reach for this if: You already have a squat rack and bench but want a dedicated cable station that disappears against the wall.
Not for you if: You cannot bolt into wall studs or want a freestanding unit that moves with you.
3. JELENS S11 Power Cage
A 2,000-lb rack with a cable pulldown for the price of a cheap treadmill.
Budget-minded lifters keep coming back to this rack because it gives you a full power cage squat rack with an integrated lat pulldown system, built from 50mm x 50mm heavy-duty steel pipes. The frame supports 2,000 pounds — equal to the highest-rated racks in this guide — and has 13 height positions marked with laser-cut numbers so you don’t have to count holes in the dark.
The pulley system uses a precision steel shaft with polished high-strength solid steel wire rope. Owners call it “smooth” and say the cables glide with almost no noise. The included attachments cover everything: a lat pulldown bar, cable bar, T-bar, J-hooks, safety rods, a 360-degree landmine attachment, and even a pull-up bar with different hand holds. The crowd notes that for “under this is a solid piece of equipment” — build quality is praised by 27 owners in the data, and assembly is straightforward with clear instructions. The honest downside is paint scratching off safety bars and dip handles where they insert into the uprights. It is cosmetic, not structural, but note if you want a pristine look.
At 57.48 inches deep by 44.49 inches wide, it fits a tighter garage than many full-size cages. Owners matched it with a flat bench and a set of bumper plates and say they get a full squat, bench, deadlift, and cable workout without leaving the rack.
Value math: You get a 2000-lb-rated steel cage, cable pulldown, landmine, and dip bars for less than the cost of most standalone benches.
Grab this if: You are building your first garage gym on a tight budget and want a rack that can grow with your strength levels.
Pass if: You need a Smith machine or an enclosed weight stack — this is a plate-loaded cage only.
4. SPORTSROYALS Power Rack (RK2)
Wide enough for two users and stable enough for live-in squats.
This is the rack that owners mention most for stability — it earns 170 positive mentions on that spec alone. The SPORTSROYALS RK2 is a 1,200-lb capacity power cage made from 50x50mm commercial steel square frame with 1.5mm wall thickness. The frame weighs 150 pounds and has two reinforcing tabs that reduce wobble during aggressive exercises like barbell rows or band-resisted squats. The assembled footprint is 61.6 inches wide by 56 inches deep — roomy enough for multiple family members to train simultaneously.
The upper and lower pulley system uses precision bearing pulleys and fully electroplated telescopic poles for smooth movement. Owners note it feels solid for 300-500 lbs with only a “slight side-to-side wobble” at the top end. The included accessory set is generous: lat pulldown bar, cable bar, cable handles, J-hooks, safety frames, safety rods, wide/narrow pull-up frame, dip bars, 360-degree landmine, foot board, band pegs, and plate storage brackets. The honest note from reviews is that the squat bar sits close to the pulley — some owners squat facing backwards to avoid interference. Assembly takes about 3 days for solo builders, though two people make it straightforward.
At 82.6 inches tall, it fits an 8-foot ceiling with 10 inches of clearance. Owners at 6-foot-1 say the pull-up bar is slightly short for full extension, but it still works.
Stability-first design: Reinforcing tabs and a 150-lb frame mean no bolting to the floor for most users.
Best for: The intermediate lifter who wants a stable, wide cage with enough attachments to cover every major lift without buying extras.
Not ideal for: Heavy powerlifters pushing 500+ lbs — the frame is rated for 1,200 but the side-to-side wobble appears at the upper end.
5. Sportsroyals Home Gym Station (HPM02)
A weight-stack gym with leg press and chest fly in one compact frame.
If shuffling plates around sounds like a chore, this all-in-one station uses a 150-lb selectorized weight stack — just slide the pin and go. The Sportsroyals HPM02 combines six workout machines into one unit, including a dedicated leg press station and chest fly arms. It supports 35+ exercises from lat pulldowns and shoulder presses to preacher curls and calf raises. The frame uses 70x50mm heavy-duty steel tubing with 2mm thick walls and a wide H-base, so it stays planted even during explosive leg extensions.
The 150-lb weight stack glides on steel-shaft pulleys with 11 adjustable levels. Owners praise the build quality and call it “sturdy, heavy, versatile.” Assembly takes about 3 hours with two people, and the hardware is labeled per step — the manual includes a 19-minute video guide. The part labeling draws mixed feedback, but most owners find the step-by-step instructions clear enough. The leg press footplate adjusts front-to-back and height-wise, and the 4-position seat and 5-position butterfly arms fit users from 5’2″ to 6’3″.
The honest limitation is the 150-lb weight stack. Strong intermediate lifters will outgrow it for lat pulldowns and tricep pushdowns within a few months. The frame itself is rated for 265 lbs user weight, so it is built for the home gym crowd, not heavy powerlifting.
Pin-select convenience: No plates to load; 11 weight levels let you progress in small jumps without re-racking.
Get this if: You want the simplicity of a weight stack — just pull the pin — and need leg press and chest fly in one machine.
Skip if: You already squat 250+ lbs on the bar — the stack will max out fast for lower-body cable work.
6. MAJOR FITNESS Drone1 Power Cage
A power rack and cable crossover that fits under an 85-inch ceiling.
The Drone1 measures 63 inches deep by 66 inches wide by 85 inches tall — a compact footprint that slides into most garages without overwhelming the space. It combines a power rack, cable system, pull-up bar, and landmine attachment into one unit. The frame is built from 2-inch by 2-inch reinforced steel uprights and is rated for up to 1,500 lbs. That puts it in the middle of the pack for capacity — stronger than the SPORTSROYALS rack but below the 2,000-lb leaders.
The integrated cable system supports lat pulldowns, low rows, cable flyes, tricep pushdowns, and bicep curls. Owners rate the cable system as smooth, especially after applying silicone lubricant. Assembly details earn praise: most owners finish in 2.5 to 3 hours solo, and the manufacturer provides lifetime customer support. A few customers note missing pulley parts, but MAJOR FITNESS replaced them quickly. The cables do tend to twist during use — a minor inconvenience that a cable-swivel upgrade solves.
The crowd praises the quality-to-price ratio. It is not a pro gym replacement, but for garage intensity, it delivers everything from bench press to seated rows without adding a second machine. The one-year warranty covers parts, and the company offers free training plans for beginner, fat loss, and muscle-building phases.
Lifetime backup: MAJOR FITNESS provides lifetime customer support, so a missing bolt or worn pulley gets a quick response.
Choose this for: A balanced cage that will not dominate your garage — 63×66 inches fits where bigger racks won’t.
Look elsewhere if: You need a 2,000-lb rated frame or want dual independent pulleys for partner training.
7. Eonfit E2 Power Rack
The cage with 360-degree rotating arms that let you angle any cable exercise.
Most power cages keep the cable pulleys on a fixed vertical track. The Eonfit E2 changes that with pivot arms that rotate 360 degrees — position them outward for a deeper chest fly stretch, inward so the weight sits directly under you for shrugs, or above for lat pulldowns. This open up over 100 exercise variations that a standard fixed-pulley cage cannot do. The arms are unlabeled left and right, so assembly requires a bit of care, but once set, they feel premium.
The frame uses 14-gauge 2×2 steel with 1-inch hole spacing. The cage weighs about 220 pounds and supports up to 1,200 lbs. Owners say it is “rock solid” for bench press at 210 lbs, squat at 180 lbs, and lat pulldown at 180 lbs. It ships in three boxes and takes about 6 hours solo to assemble — the tips from experienced owners include not tightening bolts beyond 70% until the frame is square. The included accessories cover J-hooks, a multi-grip pull-up bar, safety arms, dip bars, a landmine, a row foot tube, and a full set of cable handles.
The crowd calls it the “best value for a complete power cage with cables.” The pulley system is smooth, though some owners upgrade to aluminum pulleys (around aftermarket) for an even better feel. The floor plate can be a tripping hazard, and the landmine attachment had metal shavings on a few units. For a garage gym that does not have room for both a rack and a separate functional trainer, this is the single-unit solution.
360-degree advantage: Pivot arms let you mimic cable crossover machines, plate-loaded lat pulldowns, and overhead tricep extensions from a single upright.
Reach for this if: You want a functional trainer and power rack in one machine, and the pivot arm flexibility matters more than raw weight capacity.
Think twice if: You are on a strict timeline — a 6-hour solo build is one of the longer assemblies in this guide.
8. Mikolo HR06 Power Cage
A half-rack with independent dual pulleys and 2mm-thick steel uprights.
The Mikolo HR06 is a half-rack design — meaning it takes up about two-thirds less floor space than a traditional four-post power cage — but it does not skimp on capacity. The frame supports up to 2,000 lbs with 2mm-thick tube walls (thicker than the 1.5mm found on many budget racks). The standout feature is the independent 1:1 ratio dual pulley system on both sides of the frame. Because each side works independently, you can run supersets, drop sets, or two people training at once without cable interference.
The “HR” in the model name signals the aluminum pulley upgrade — this unit ships with 18 aluminum pulleys rather than the plastic/nylon ones on cheaper cages. Owners say the pulley movement is smooth but can require occasional WD-40 maintenance. The digital markers help you reset J-hooks quickly between exercises.
The crowd praises the stability, with 33 owners calling it stable and 27 citing quality. The half-rack layout leaves room inside for a heavy bag or storage. The downsides: the included tools are poor (plan to use your own socket set), paint chips appear on the safety bars, and the row attachment limits range of motion for tall lifters. The narrow width makes pull-ups feel tighter than a full-width commercial cage.
Independent pulley system: You can load 100 lbs on one side for a unilateral row while someone else does face pulls on the other — no sharing cables.
Best for: Garage owners who want a space-efficient half-rack with commercial-grade aluminum pulleys and dual-user cable capability.
Not ideal for: Tall lifters (6’2″+) who need full pull-up bar extension — the half-rack frame may feel constricting.
9. MAJOR FITNESS F22 Power Rack
Thicker 2×3 steel uprights and a dual-triangle base that stays planted without bolting.
Most home-gym racks use 2×2 steel. The F22 steps up to 2×3 commercial-grade 14-gauge steel (0.08-inch wall), giving it a 1,600-lb static weight capacity and better resistance against frame sway during heavy squats or aggressive cable crossovers. The dual-triangle base design increases floor contact area, so you do not need to bolt the rack down for standard stability — a real advantage if your garage has epoxy or tile you want to keep intact.
The independent dual-pulley system runs a 2:1 ratio, which means smoother cable travel and more precise resistance control — especially useful for high-rep cable flys and lat pulldowns. Two people can train at once without cable tangling, making it efficient for partner workouts. Reviewers point out a 3-4 hour assembly time and describe the rack as “rock solid.” The chin-up handles are perfectly placed, and the pulleys run smoothly from the start, though a note of silicone lubricant keeps them that way. The dip bar handles are on the narrow side (1.25 inches with foam) and some owners find them uncomfortable for longer sets.
The attachment set is professional: J-hooks, safety arms, foot pedals, landmine, T-bar, dip bars, lat pulldown bar, cable bars, and band pegs. The color options include a khaki finish that stands out in a sea of black racks. The lat bar is not as wide as commercial versions, but the consensus is it is more than functional for home use.
Unbolted stability: The dual-triangle base keeps the rack solid during weighted pull-ups — no floor anchors required for most users.
Choose this for: A rack that does not need to be bolted down, with uprights thick enough to handle near-elite squat loads.
Skip if: You prefer a 1:1 direct-drive pulley feel — the 2:1 ratio softens resistance.
10. pooboo P43 Power Cage
A 4.8-star cage with a 2,000-lb frame and more attachments than you will use.
The highest-rated power cage in this guide by owner feedback, the pooboo P43 earns a 4.8-star average across nearly 200 ratings. The frame supports 2,000 lbs — matching the maximum from the JELENS and Mikolo HR06 — but the P43 ships with the most comprehensive accessory package in this roundup: 2 J-hooks, 2 safety spotter arms, 2 dip bars, 2 cable grip handles, a lat pulldown bar, a row bar, a row low foot board, a 360-degree landmine, 4 plate storage pins, 4 weight holders, and 4 band pegs. That is over 20 pieces in the box. The upgraded P43-Pro model adds LAT training handles, an Olympic barbell, a barbell pad, and an ankle strap.
The steel construction is heavy-duty; owners call it “commercial-grade quality” for the price. The pulley system runs smoothly, the safety bars lock in solid, and the pull-up bar feels durable for daily use. The cage assembles from 2 packages to reduce shipping damage, and instructions are clear. A few owners took around 10 hours spread across three days, but most finished in a single weekend. Customer service gets high marks for fast responses.
The 62.9-inch depth and 43.3-inch width mean it is relatively narrow for a full-size cage — good for tight garages but may feel snug for wide-grip bench press on a 7-foot barbell. The plastic components (pulley bushings, handle grips) are the only lightweight touch on an otherwise heavy unit.
Attachment-rich: 20+ pieces included — landmine, dip bars, lat bar, row bar, band pegs, and plate storage — no add-on purchases needed.
Best for: The lifter who wants the highest-rated cage in the guide with all the accessories included and a 2,000-lb frame that will outlast their training plateaus.
Consider alternatives if: You need a wider cage (43 inches feels tight for 7-foot barbell benching) or want a 1:1 pulley ratio — this uses a standard 1:1 system.
11. SunHome Multi-Function Home Gym
A Smith machine and cable station that two people can use at the same time.
The SunHome is built for couples or training partners who want to work out together without taking turns. It has a Smith machine on one side and a dual-cable crossover station on the other, each with independent 138-lb selectorized weight stacks. One person can squat on the Smith bar while the other does chest flys on the cables — no waiting. The frame uses 2×2 commercial-grade steel and the unit accommodates over 100 exercise combinations.
The Smith bar glides smoothly on linear bearings, and shoppers say it holds up to 400 lbs without binding. The weight stacks are easy to adjust with a pin selector, and the SMITH bar allows heavier loads than the built-in stack alone (you add plates directly to the bar). Assembly takes about 4-5 hours with two people and is described as “IKEA-style” with tools included. The instructions are well-written, though the bench does not adjust — a 5’3″ owner found the leg press footplate awkward without lower back support. The customer service team gets high marks for quickly replacing missing parts.
The honest trade-off: at 96.85 inches deep, this is the deepest machine in the guide. It will dominate a single-car garage and may not fit at all if your garage is under 10 feet deep. The 138-lb stacks are fine for most beginners and intermediate users, but strong athletes will outgrow the cable resistance within a year.
Dual-user layout: One person does Smith machine squats while the other does cable crossovers — no waiting, no overlapping turf.
Perfect for: Couples or training partners who share a garage gym and want simultaneous Smith machine and cable work without buying two machines.
Not for: Anyone with a shallow garage (97-inch depth is huge) or a single lifter who could get more value from a dedicated power cage.
Understanding the Specs
Pulley Ratio (1:1 vs 2:1)
The pulley ratio tells you how much weight you actually feel at the handle. A 1:1 system means a 50-lb plate gives you 50 lbs of resistance — pure and direct, best for compound pulls like rows and lat pulldowns. A 2:1 system halves the resistance (100 lbs on the peg = 50 lbs in your hands), but the cable moves twice as fast, which allows smoother, higher-rep movements like cable flys. If you prioritize heavy cable rows, go 1:1. If you want butter-smooth isolation work and easier weight progression, 2:1 is more forgiving.
Frame Gauge and Upright Size
The two numbers that matter: the upright cross-section (2×2 or 2×3 inches) and the steel thickness (measured in gauge or millimeters). Thicker is better for stability. 11-gauge (about 0.12 inches) is commercial-grade, 14-gauge (about 0.08 inches) is home-gym standard, and thinner steel wobbles under heavy loads. A 2×3 upright resists front-to-back sway better than a 2×2 of the same thickness. Most racks in this guide use 14-gauge steel with 2×2 uprights, which handles up to 300-500 lbs comfortably.
FAQ
Will a power cage fit in my standard garage?
Do I need to bolt my power rack to the concrete floor?
What is the difference between a Smith machine and a power cage?
Why do some racks have a 2:1 pulley ratio instead of 1:1?
How much assembly time should I expect for a power cage?
Can I use my Olympic barbell with any power cage?
What attachments come with most home gym power racks?
How do I maintain the pulley system on a cable machine?
Is a wall-mounted cable station as stable as a freestanding power cage?
What ceiling height do I need for a pull-up bar on a power cage?
Final Thoughts: The Verdict
For the majority of shoppers, the workout equipment for garage winner is the DONOW Smith Machine because it packs a Smith press, dual cable stacks, and a power rack into one 2,240-lb rated frame — the most complete single-machine solution for the serious garage gym. If you want a rotating-arm functional trainer that does 100+ exercises, grab the Eonfit E2 Power Rack. And for the highest owner approval with a 2,000-lb frame and over 20 included attachments, the pooboo P43 Power Cage is the one to reach for.
How We Picked
We do not accept paid placement. Every pick is matched to a real buyer and a real use-case; we do not hands-on test units.
Sources & Methodology
Specifications: manufacturer listings and product documentation. Review insights: verified customer reviews, as of July 2026. Pricing: not shown on this page (it changes often); check the current price via the retailer link.
As an Amazon Associate, Calories Fit earns from qualifying purchases. This does not affect which products we feature.