How to Use Akunbem Women Electric Shaver | Smooth Skin Step by Step

Getting a smooth, irritation-free shave with the Akunbem women’s electric shaver comes down to prep work and technique, not pressure. The dual-head design handles everything from bikini lines to legs, but each area asks for a slightly different approach. Charge it fully first, pick the right head, and shave against the grain with steady, light strokes.

Prep Your Skin Before Shaving

The shaver works best on clean, dry skin. Wash the area with mild body wash or clean water, then pat it completely dry before you start. if your skin runs dry or sensitive, apply a thin layer of shaving cream or gel — this cuts down on friction and helps the blades glide.

For longer hair, don’t skip the trim step. Switch to the trimmer head and cut hair down to roughly 3–5 mm first. That prevents the shaving head from tugging or clogging on thick growth, which is the main cause of that “pulling” feeling people hate.

Avoid shaving over irritated, inflamed, sunburned, or abraded skin. Wait until the skin fully recovers before you use the shaver in that spot.

Choose the Right Head and Shave Each Area

The Akunbem electric shaver ships with dual heads — one for trimming and one for fine shaving. Use the trimmer for longer hair and the shaving head for the final pass. The shaving head handles finer hair removal on the bikini line, underarms, legs, arms, and face.

The technique differs by body part, and the angle matters more than speed:

• Legs and arms: Hold the blade at about 70 degrees and shave in the opposite direction of hair growth with steady strokes. This gives the closest result without extra passes.
• Underarms and bikini area: Apply a warm, wet towel for a few minutes first to soften the hair. Add shaving cream, then move slowly along the natural curve of the hair growth. Don’t rush these zones — they’re the most sensitive.

The key is to let the blade do the work. Repeatedly rubbing the same spot overworks the skin and causes razor burn, especially in sensitive areas. One smooth pass beats three aggressive ones.

Clean, Dry, and Store the Shaver Properly

After shaving, rinse the shaver head under running water — the body is IPX7 waterproof, so wet use is fine. But don’t get the charging station or the charging adapter wet; the official site from Akunbem’s product page clearly states only the shaver body is waterproof, and the charging dock must stay dry. Clean the blades with the included brush, then let all components air dry completely before storing.

Store the shaver in a dry, cool place. Dry blades perform better and stay hygienic between uses, so make this a habit rather than an occasional deep-clean.

One more rule that matters: never use other-brand chargers or batteries. The official guidance warns that third-party charging accessories can damage the circuit board or battery, and in the worst case cause an explosion risk. Stick with the included USB cable and dock.

Charge It Right the First Time

Fully charge the shaver before the first use.

Don’t charge the device in damp areas like a bathroom counter near the sink, since that raises the risk of shock or short-circuit. Plug it in on a dry surface, let it top up fully, and unplug it when done.

If you’re still weighing options or want to compare it against other models before you buy, our roundup of the best women’s electric shavers on the market breaks down the top picks side by side.

FAQs

Can I use the Akunbem shaver in the shower?

Yes, the shaver body itself is IPX7 waterproof, so you can rinse it and use it with water. But the charging station and adapter are not waterproof and must never get wet. Keep the dock and cable away from the shower or sink, and only charge the device on a dry surface.

Does shaving with this device hurt?

No, the shaver is designed for painless hair removal. The key is proper prep — softening hair with warm water, using shaving cream on sensitive areas, and letting the blade glide rather than pressing down. Shaving against the grain on legs gives the closest result, while the bikini area needs a slower, gentler touch.

How often should I clean the shaver head?

Rinse the shaver head after every use, then use the included brush to remove any loose hair or debris. Let it air dry completely before storing. A clean, dry blade performs better and lasts longer, so make this a daily habit if you shave regularly.