How to Choose a Walking Stick? | The Fit That Keeps You Stable

Choosing the right walking stick comes down to getting the height exactly right, picking a handle and tip that match where you walk, and holding it in the hand opposite your weaker side.

One wrong measurement can turn a helpful stick into a stumble risk. If the height is off, nothing else—not the grip, not the material—will fix the instability. Get this right first, and everything else falls into place.

Getting the Height Exactly Right

The correct height is the foundation. Stand in your normal walking shoes with your arms relaxed at your sides. Have someone measure from the floor straight up to the crease of your wrist — that bone bump on the pinky side. That number is your stick length.

For an adjustable metal stick, press the button and slide the inner shaft until it matches that measurement.

A stick that is too tall forces your shoulder up and throws your balance forward; one too short makes you stoop and puts extra pressure on your wrist.

Which Grip, Material, and Tip Work for You?

Your walking surface and hand strength decide the rest of the setup. The table below covers the most common combinations so you can match one to your daily route.

Feature Best For Trade-Off
Foam / palm grip Arthritis, carpal tunnel, weak grip Wears faster than rubber or cork
Ergonomic / orthopaedic grip Reducing muscle fatigue over long walks Bulkier than basic foam handles
Aluminum shaft Everyday use, adjustable, lightweight Less elegant than wood
Carbon fiber shaft Active hikers who want the lightest option More expensive, less vibration absorption
Wood shaft Classic look, single-piece strength Not adjustable; must be cut to size
Rubber / PVC tip Indoor, pavement, wet urban surfaces Slippery on loose dirt or ice
Spiked / ice tip Hiking trails, gravel, snow, ice Can scratch indoor floors
Shock-absorbing models Joint pain, long daily walks Adds weight and one more thing to break

If you know you will mostly walk on pavement, a foam palm grip on an aluminum shaft with a rubber tip covers almost everyone. For dirt trails or winter walking, swap the rubber tip for a spiked one. If your hands ache after 15 minutes, an ergonomic grip is worth the swap — it shapes itself to your palm and reduces the effort your fingers have to make.

For readers ready to shop, our roundup of tested wood walking sticks covers the models that actually hold up to daily use and how each cuts to fit.

Using the Walking Stick the Right Way

The most common mistake is holding the stick on the same side as the injured leg. That twists your gait and transfers load unevenly. The rule: hold the stick in the hand opposite your weaker or painful leg. Move the stick forward at the same time as that weak leg, as a single unit. Your weight is then carried through your stronger side while the stick supports the injured one.

On stairs, the pattern flips. Going up: step with your stronger leg first, then bring the weaker leg and the stick up together. Going down: move the stick and the weaker leg down together first, then follow with the stronger leg. A Mayo Clinic guide on cane use covers the same sequence with clear illustrations.

FAQs

How do I know if my walking stick is too tall?

A stick that is too tall forces your shoulder to hike upward when you grip it, and your elbow will be nearly straight when the stick is planted. You will feel an ache in your shoulder or upper back after a short walk — that is the clearest sign.

Can I use a walking stick on both sides at once?

Two sticks (often called trekking poles or a pair of walking sticks) are common for hikers balancing a pack or people recovering from bilateral injuries. For most single-leg or single-hip issues, one stick held in the opposite hand is sufficient and less cumbersome.

How often should I replace the rubber tip?

A worn tip loses traction on wet pavement and increases the slip risk that the stick is supposed to prevent.

References & Sources

Please use a real email you check. If it's fake or mistyped, your message won't reach us and we can't reply — wrong addresses are rejected automatically.